Double Cone Mixer
Product description
The double-cone mixer is a device that achieves efficient mixing by virtue of its double-cone cylinder structure. During operation, the cylinder rotates around a horizontal axis, driving the materials to flip up and down and circulate in both directions. Under the influence of gravity, inertial force, etc., the materials complete diffusion and shearing, quickly reaching a highly uniform mixed state. It has a simple structure and is easy to maintain. It is suitable for powder and granular materials in multiple industries such as chemical engineering, food, and medicine. The unloading is thorough with little residue, and it can effectively avoid cross-contamination between batches. Moreover, it is easy to operate and can run automatically after setting parameters. It plays an important role in industrial production.
Working principle
The double-cone mixer achieves mixing through a unique double-cone structure. During operation, the double-cone cylinder rotates around a horizontal axis. The frictional force between the inner wall of the cylinder and the material drives the material upward. After reaching a certain height, it falls under the action of gravity. Meanwhile, the double-cone structure causes bidirectional convection of the materials. Some of the materials flow from one end to the other, forming convective mixing. In addition, the material particles are subjected to the combined action of gravity, friction and inertial force, interpenetrating and diffusing with each other. The shear force generated between the materials and between the materials and the cylinder wall breaks the material lumps, achieving uniform mixing of the materials. It can be widely applied in the chemical, food, pharmaceutical and other industries.
Product characteristics
- High uniformity of mixing: The double-cone structure and rotational movement enable the materials to flip up and down, undergo bidirectional convection, and diffuse and shear under the action of multiple forces within the cylinder. This allows materials of different properties to be thoroughly mixed, achieving a relatively high level of uniformity.
- High mixing efficiency: The equipment rotates at a moderate speed, allowing materials to complete multiple cycles of mixing within a short period of time. Compared with some other types of mixing equipment, it can achieve the expected mixing effect in a shorter time and improve production efficiency.
- Minimal damage to materials: During operation, materials mainly flow and mix naturally under the influence of gravity and the rotation of the cylinder. The shearing force and frictional force are relatively mild, causing less damage to material particles. It is particularly suitable for materials that are prone to breakage and wear.
- Low noise: The structural design and operation mode of the double-cone mixer are relatively stable. The noise generated during the operation of the equipment is low, which is conducive to creating a relatively quiet working environment and reducing the noise hazard to the operators.
- Good sealing performance: It is usually equipped with a good sealing device, which can effectively prevent material leakage and the entry of external impurities during the mixing process. This not only ensures the purity of the materials but also avoids environmental pollution. It is especially suitable for the mixing of toxic, harmful or materials with special requirements.
Application
The double cone blender, with its excellent structure and reasonable design concept, features rapid mixing, uniform mixing, ease of operation, convenient cleaning,urdiness, compact structure, and high technological content. It is widely used in industries such as pharmaceuticals, food, pesticides, zinc oxide, detergents medicine, compound fertilizers, feed, oil, metallurgy, building materials, coatings,
dye pigments, additives, calcium carbonate, biology, ceramics, chemicals fragrance, chicken essence, seasonings, tea, chemical building materials, coatings, plastics and rubbers, seasonings, etc., for mixing powdered materials.
Product parameter
| Model |
W-300 |
W-500 |
W-1000 |
W-1500 |
W-2500 |
W-4000 |
W-6000 |
W-8000 |
|
Production capacity
(kg/time)
|
150 |
250 |
500 |
750 |
1250 |
2000 |
3000 |
4000 |
|
Full volume
(cubic meter)
|
0.3 |
0.5 |
1 |
1.5 |
2.5 |
4 |
6 |
8 |
|
Mixing time
(min)
|
4-8 |
4-8 |
6-12 |
6-12 |
6-12 |
6-15 |
6-15 |
6-15 |
|
Motor power
(KW)
|
1.1 |
2.2 |
3 |
4 |
5.5 |
7.5 |
11 |
15 |
| Cylinder speed (RPM) |
15 |
15 |
12 |
12 |
12 |
10 |
10 |
10 |
|
Dimension
(L*W*H)
|
1680*650
*1600
|
2080*750
*1900
|
2150*850
*2100
|
2300*1600
*3100
|
2500*1000
*2450
|
2980*1580
*2800
|
3500*1800
*3000
|
3980*2000
*3200
|
| Weight (kg) |
310 |
550 |
800 |
950 |
1650 |
1880 |
2350 |
2680 |
Detail display
Product display
Packaging & Shipping
Why choose us
About us
Company Profile
We have been specializing in the production of Screening and conveying equipment for 13 years. China's vibrating screen industry top three. And we have done matching and OEM for many large companies. Including the world's top vibrating screen manufacturer, Sweco, USA, we have OEM for his China region. And our products are often exported to Australia, Thailand, Indonesia, New Zealand and other countries.
Your message must be between 20-3,000 characters!