| Place of Origin: | China |
|---|---|
| Brand Name: | EVERSUN |
| Model Number: | mixer |
| Minimum Order Quantity: | 1 |
| Packaging Details: | wooden box |
| Delivery Time: | 5-8 work days |
| Payment Terms: | L/C, T/T |
| Material: | SUS304, SUS316L, Stainless Steel 304 / SUS316L | Max. Loading Capacity: | 1000L |
|---|---|---|---|
| Applicable Industries: | Manufacturing Plant, Food & Beverage Factory | Product Name: | V Type Mixer |
| High Light: | Agricultural V Type Powder Mixer 2L,SUS316L V Type Solid Mixer,Industrial Dry Powder Mixer |
||
Maintenance of V-type mixer
It is inevitable that there will be problems in the long-term use of V-type mixer. This is not to say that the quality of the products produced by the manufacturer is defective. No matter what is used for a long time, there will be some small problems. Although this will not affect the work for a period of time, if it is not handled in time, minor faults may become major problems. Therefore, it is important to learn some simple maintenance methods for V-type mixer.
1. The machine stops suddenly during use, and the discharging mechanism cannot operate normally.
2. The main engine of V-type mixer vibrates and makes abnormal noise. The installation is not adjusted properly and the transmission is damaged.
3. The bearing of V-type mixer is overheated. When the bearing is poorly lubricated, damaged or the main shaft is bent, the rotor is seriously unbalanced, and the belt is too tight, the bearing will overheat. You can add and replace lubricating oil, replace bearings, main shafts, balance rotors, and adjust belt tightness to restore the bearings to normal conditions.
4. The main reasons for low production efficiency are insufficient power of V-type mixer motor, improper preparation of belt pulley, belt slipping, severe wear of hammer, uneven feeding or high water content of raw materials
5. The V-type mixer is difficult to start and cannot be started. The main reason is that the V-type mixer is not connected to the power supply and lacks phase. It is necessary to check the circuit.
